POWERASPHALT / PLANT COMPONENTS
Cellulose Fibre Dosing System
Precisely meter fibre additives for SMA production.
The cellulose or fiber additive unit ensures that the additive in asphalt recipes using fiber is weighed and transferred to the mixer. It combines storage, dosage and pneumatic transfer steps in stone mastic asphalt (SMA) applications. Integration into existing plant; It is planned together with the mixer cycle and control system.
PROJECT-SPECIFIC EQUIPMENT FOR YOUR PRODUCTION LINE
PRODUCTION FLOW
How it works in three steps.
The task of the unit, associated equipment and the route of the material.
Preparation of the additive
Cellulose fiber is kept ready, protected from moisture, in a storage section appropriate to its material properties.
Weighing and dosage
The feeder and loadcell supported weighing system measures the amount of additive defined in the recipe.
Transmission to mixer
The additive is introduced into the mixing cycle at the appropriate time through the air conveying line, cyclone and discharge valve.
INSIDE THE EQUIPMENT
Main components and their functions.
The housing, drive and control components are assessed together with production and maintenance requirements.
fiber additive silo
The storage method is chosen according to the form of the fiber used and the packaging layout.
Flap and star feeder
It ensures controlled transfer of the additive from the warehouse to the measurement section.
Loadcell weighing unit
Measures the target additive amount per batch; Calibration is evaluated together with automation.
Air blower and piping
It delivers the weighed additive to the mixer under suitable transport conditions.
Cyclone and discharge
It ensures that the additive in the transfer line is separated and directed to the mixer inlet.
Automation connection
Additive dosage is coordinated with the recipe and mixer cycle; The working steps are connected to the control system.
TECHNICAL CONFIGURATION
Specify the right equipment for your plant.
It is based on your production target and selected configuration, rather than a standard number.
| Feature | Options / design considerations |
|---|---|
| APPLICATION | Fiber added hot mix and SMA recipes |
| Dosage | Loadcell supported weighing |
| Transfer | Pneumatic conveying device |
| integration | Project evaluation for new or existing plant |
Selection and integration
The physical form of the additive, batch amount, cycle time and transfer distance determine the choice. Storage and piping are planned to limit the buildup of fiber. Modular adaptation can be made by examining the mechanical and electrical connections of the existing facility.
OPERATION AND SERVICE
Maintenance access is part of the design.
Equipment tracking, automation connections and service planning are handled within the same production chain.
Inspection and preventive maintenance
Additive storage conditions, feeder, weighing system and air line are checked. Moisture and build-up can affect regular feeding. The operation of the sensors, throttle movements and loadcell calibration are monitored in the maintenance plan.
Automation and technical support
Sensors, operating commands and safety interlocks are evaluated together with the existing control system. Maintenance and adjustments are made according to the equipment user manual and authorized service procedures. Get technical support →
FREQUENTLY ASKED QUESTIONS
Frequently asked questions about Cellulose Fibre Dosing System.
It is used in hot asphalt recipes that require fiber additives, especially in SMA applications; The amount is determined according to the mixture design.
Integration can be done by examining mixer input, cycle time, field area and automation suitability.
Price; It is prepared according to the scope of capacity, body and drive features, heating or transport equipment, automation, transportation and assembly. You can request a technical offer by sharing your existing equipment and project information.
Mechanical dimensions, elevations, capacity balance, electrical infrastructure and automation connections are examined. The appropriate solution is determined by site and equipment evaluation.
CONNECTED SYSTEMS
Consider the production line as a whole.
The performance of a unit is complemented by the harmony of the equipment before and after it.
Twin-Shaft Asphalt Mixer
Combine aggregate, mineral filler and bitumen in a controlled batch.
Polymer-Modified Bitumen Plant (PMB)
Process bitumen and polymer under controlled conditions.
LET’S DISCUSS YOUR PROJECT
Request a technical quotation for your equipment.
Share your plant model, target capacity, material information and existing field photos; Let’s clarify the equipment scope together.