High mobility
Portable units that adapt to changing construction sites.
MOBILE SERIES
ANKAPORT
200 t/h Mobile Asphalt Plant
Flexible production for changing sites.
POWER ASPHALT ANKAPORT 200 is a mobile batch asphalt plant designed for aggregate with 3% free surface moisture and nominal output of 200 t/h. Its transportable chassis, modular units and separate aggregate, filler and bitumen weighing support relocation and production to the mix design.
200
t/h
production capacity
production capacity
WHY POWER ASPHALT
Engineering that empowers
your production.
Mobile asphalt plants are designed for road contractors relocating between sites, with assembly and dismantling in mind. Reduced foundation and lifting requirements can simplify installation. Aggregate, filler and bitumen are weighed to the recipe in the batch process, with production monitored through automation.
Quick installation
Less need for concrete foundations and cranes.
Intelligent control
Manage production processes from a single point with automation.
Service support
Remote connection and spare parts support.
TECHNICAL INFORMATION
ANKAPORT Technical Specifications
| Model | ANKAPORT 200 |
|---|---|
| Production capacity | 200 t/h (at 3% aggregate surface moisture) |
| Production method | Mobile batch production |
| Layout | Transportable chassis and modular units |
| Cold aggregate feed bins | 5–6 × 15 m³; 75–90 m³ total |
| Burner thermal capacity | 17,500 kW (17.5 MW) |
| Dryer drum dimensions | Ø2,200 × 8,500 mm (internal diameter × length) |
| Hot aggregate screen | 5–6 decks, with bypass |
| Hot aggregate bin | 25 tonnes |
| Mixer capacity | 2,500 kg/batch; twin-shaft |
| Batch cycle time | 45–60 seconds; depending on mix and operating conditions |
| Filter system | Reverse-air baghouse filter with meta-aramid/Nomex bags |
| Bitumen tank | Insulated, with thermal-oil heating coil |
| Filler silo | 60 tonnes |
| Aggregate / filler / bitumen weigh hopper capacities | 3,000 / 350 / 250 kg |
| Control system | PowerControl SCADA automation |
| Service | Remote connection and spare parts support |
ⓘ Nominal capacity is based on 3% aggregate surface moisture. Actual output depends on moisture, mix, feed continuity and site conditions. Filter airflow, power infrastructure, transport and installation requirements are confirmed in the final design.
FAQ
Frequently Asked Questions
How is installation planned?
Project requirements, site conditions and target capacity are assessed together. The layout and unit configuration are agreed before manufacturing, delivery and commissioning are coordinated.
Can the site layout be customised?
Yes. Modular units can be placed specifically for the project by evaluating land dimensions, material flow and operating needs.
How are service and spare parts support provided?
Remote access through PowerControl and guidance from our service team support fault diagnosis. Widely available components simplify spare parts sourcing.
How is an asphalt plant priced?
Price depends on capacity, mobile or stationary configuration, fuel, bitumen storage and optional units. Share your requirements for a project-specific technical quotation.
Under what conditions does ANKAPORT 200 produce 200 t/h?
Nominal capacity is specified for aggregate with 3% free surface moisture. Actual output depends on aggregate moisture, mix design, feed continuity and ambient conditions.
Can the mobile asphalt plant be relocated?
The transportable chassis and modular design allow dismantling and reassembly to be planned. Route, module dimensions, lifting equipment and infrastructure at the new site are assessed together.
Which fuel options can be considered?
Depending on the burner configuration, fuel oil, diesel, natural gas or LPG may be considered. The burner and fuel supply equipment are selected during technical quotation.
Does a mobile plant require site preparation?
Yes. Suitable ground, module supports, power supply and utilities are required. Erection and commissioning time depends on site readiness and equipment scope.
PRODUCTION FLOW
Controlled production, from aggregate to hot mix
In the ANKAPORT 200 mobile asphalt plant, batch production follows an integrated process from material preparation to truck loading.
01
Feeding, drying and screening
Fractions stored in 75–90 m³ cold feed bins with 5–6 compartments are metered to the dryer by belt feeders. Heated aggregate is elevated to a 5–6-deck vibrating screen and separated into hot aggregate bins.
02
Weighing, mixing and dispatch
Aggregate, filler and bitumen are weighed separately to the recipe and combined in a 2,500 kg/batch twin-shaft mixer. The 45–60-second cycle depends on the mix and operating conditions. Finished asphalt is dispatched through the selected discharge and storage arrangement.
03
Filtration and filler recovery
Dryer gases are treated by a reverse-air baghouse filter with meta-aramid/Nomex bags. Captured filler can return where the mix and equipment allow. Airflow and emissions are assessed with equipment, fuel, operating conditions, maintenance and project requirements.
SMART CONTROL
Production management with PowerControl SCADA
Automation combines production monitoring and service access, allowing the operator to follow recipes, weighing and plant status from one control system.
01
Recipes, reporting and access control
Mix recipes are stored and dosing and weighing values monitored. Production reports can be archived for operational follow-up. User permissions and languages are configured to suit the operator organisation.
02
Operating modes and remote support
Automatic, semi-automatic and manual modes support production and maintenance. Interlocks and alarms assist the operator. With suitable network infrastructure and authorisation, VPN access enables remote diagnostics and parameter support.
SITE AND INSTALLATION
Mobility between sites and installation planning
The mobile chassis and modular units are planned together for relocation. Dismantling, transport, reassembly and commissioning are scheduled around the route, lifting equipment and site readiness.
01
Infrastructure preparation for the new site
Mobility does not eliminate site preparation. Ground bearing capacity, module layout and supports must suit project loads. Power, cabling, compressed air, required water connections and drainage are prepared for the new layout.
02
From erection to first production
- Engineering and approval: confirming the mobile module layout, equipment scope and responsibilities.
- Factory manufacturing: preparation of mechanical units, control panels and modules.
- Delivery: delivery of modules according to transport dimensions and route planning.
- Erection and commissioning: mechanical erection, cabling, cold tests, burner adjustment and weighing calibration.
- Operator training: practical instruction in production, maintenance and safe operation.
Cranes and lifting equipment are selected according to load weights and working radii in the erection plan.
03
Dismantling and reinstallation
At project completion, mechanical and electrical connections are disconnected in a controlled sequence and modules prepared for transport. After reassembly, connections, weighing systems, burner settings and safety functions are rechecked. Transport and recommissioning scope are defined in the quotation and site plan.
FLEXIBLE EQUIPMENT
Equipment configured for your project
Standard units and optional systems are selected by considering mix design, production targets, storage needs and operating conditions together.
01
Bitumen, filler and weighing systems
The insulated bitumen tank uses thermal-oil coil heating. A 60-tonne filler silo with a top filter and screw conveyor feeds production. Separate aggregate, filler and bitumen weighing supports mix dosing.
02
RAP and additive integration
RAP, modified bitumen, liquid anti-stripping additives and fibre/cellulose feeding units can be considered. RAP proportion and feeding method depend on the selected system and mix specification.
03
Energy efficiency and operating cost
Dryer flights, burner settings, insulation and maintenance are assessed together to manage heat transfer and fuel use. Cost per tonne and payback depend on fuel type, aggregate moisture, annual output, operating hours and local energy prices.
AFTER-SALES SUPPORT
Safe operation, maintenance and after-sales support
For ANKAPORT 200, operator capability and maintenance planning are as important as plant delivery.
01
Operator safety and maintenance access
Emergency stops, interlocks, access platforms, guardrails and non-slip stairs support safe operation. Temperature monitoring, alarms and maintenance procedures for bitumen and thermal-oil circuits are defined with the project equipment.
02
Spare parts, training and calibration
Service and spare parts support covers mixer wear parts, filter bags, sensors and other maintenance items. Commissioning includes operator training, manuals, maintenance planning and weighing calibration. Service scope and response conditions are defined in the contract.
03
Project documentation and technical quotation
Contact our sales team for layout drawings, foundation designs, electrical diagrams and relevant conformity documents. The quotation for the ANKAPORT 200 mobile asphalt plant depends on equipment scope, fuel selection, storage, transport and installation conditions.
COMPATIBLE UNITS
Every part of a powerful system.
FOR YOUR PROJECT
Let us prepare a special offer for your project.
Let’s talk about your production goals and plan the asphalt plant that suits you together.
ANKAPORT 200 t/h mobile asphalt plant: price and quotation
Evaluate ANKAPORT for projects requiring a 200 t/h mobile asphalt plant using the technical specifications on this page. Consider daily output, aggregate moisture, mix design, operating hours and layout alongside nominal capacity.
The quotation defines equipment scope, storage requirements, fuel and power infrastructure, transport and installation responsibilities. Compare models in the same range to identify the right capacity for your project.
How is the ANKAPORT 200 t/h mobile asphalt plant priced?
Pricing is prepared for your project based on selected units, automation, storage and delivery terms. Send your capacity and site requirements for a current quotation.
Does the nominal capacity guarantee the production amount on site?
Actual output depends on aggregate moisture, mix design, ambient conditions, feeding and the operating plan. Nominal capacity should be assessed against the expected project conditions.