POWERASPHALT / PLANT COMPONENTS
Hot Mix Asphalt Storage Silo
Coordinate production and truck loading.
The hot mix asphalt storage silo holds finished mix before dispatch, helping manage the timing difference between production and truck arrivals. An under-mixer or separate-silo layout is selected to suit site traffic and the need to store different mixes.
PROJECT-SPECIFIC EQUIPMENT FOR YOUR PRODUCTION LINE
PRODUCTION FLOW
How it works in three steps.
The task of the unit, associated equipment and the route of the material.
Acceptance of the mixture
Ready asphalt is taken directly under the mixer or into a separate storage section via the bucket transfer system.
preservation of temperature
Insulation and a heating scheme appropriate to the project help manage heat loss during standby.
Controlled loading
Vehicles are loaded with level monitoring and pneumatic discharge covers; movements are coordinated by automation.
INSIDE THE EQUIPMENT
Main components and their functions.
The housing, drive and control components are assessed together with production and maintenance requirements.
storage trunk
Single or multi-compartment structure is selected according to the separation of different recipes and shipping schedule.
Heat insulation
Body insulation and cladding support mixture temperature maintenance; Holding conditions depend on the product and project.
drain covers
Pneumatic pistons manage the lid opening-closing movement. The number of covers is defined according to the selected bunker layout.
Level and loading control
Level information is used to coordinate mixer discharge and truck loading.
Bucket transfer option
In silos separated from the tower, the conveying line ensures that the hot mixture is delivered to the relevant storage compartment.
Support structure and site layout
Truck clearance, service access and foundation loads are evaluated together with the layout project.
TECHNICAL CONFIGURATION
Specify the right equipment for your plant.
It is based on your production target and selected configuration, rather than a standard number.
| Feature | Options / design considerations |
|---|---|
| Storage options | Project solutions in the range of 30–300 tons |
| Residential | Under the mixer or separate from the tower |
| Partition layout | Single or multi-compartment |
| equipment | Insulation, level control and heated cover options |
Selection and integration
Daily production, vehicle circulation, mixture types and acceptable waiting times are taken as basis. Storage volume alone does not guarantee continuous production; It is sized together with the mixer and transfer line. Transport modules and basic requirements are planned according to site conditions.
OPERATION AND SERVICE
Maintenance access is part of the design.
Equipment tracking, automation connections and service planning are handled within the same production chain.
Inspection and preventive maintenance
Cover surfaces, pistons, position sensors and transfer mechanism are checked. Hot mixture accumulation, insulation damage and heating circuits are monitored. Cleaning and access operations are carried out with authorized maintenance procedures by ensuring energy isolation.
Automation and technical support
Sensors, operating commands and safety interlocks are evaluated together with the existing control system. Maintenance and adjustments are made according to the equipment user manual and authorized service procedures. Get technical support →
FREQUENTLY ASKED QUESTIONS
Frequently asked questions about Hot Mix Asphalt Storage Silo.
No. The hot aggregate silo stores the fractions before mixing, and the hot asphalt bunker stores the final mixture prepared in the mixer.
With a multi-compartment bunker and appropriate transfer arrangement, it can be planned to keep different mixtures in separate compartments.
Price; It is prepared according to the scope of capacity, body and drive features, heating or transport equipment, automation, transportation and assembly. You can request a technical offer by sharing your existing equipment and project information.
Mechanical dimensions, elevations, capacity balance, electrical infrastructure and automation connections are examined. The appropriate solution is determined by site and equipment evaluation.
CONNECTED SYSTEMS
Consider the production line as a whole.
The performance of a unit is complemented by the harmony of the equipment before and after it.
Twin-Shaft Asphalt Mixer
Combine aggregate, mineral filler and bitumen in a controlled batch.
Asphalt Plant Vibrating Screen
Screen hot aggregate into the fractions required by the mix design.
LET’S DISCUSS YOUR PROJECT
Request a technical quotation for your equipment.
Share your plant model, target capacity, material information and existing field photos; Let’s clarify the equipment scope together.